792hac: steyr aug a1

##title##

The rifle has also been adopted by the armed forces of Argentina, Australia ( - accepted into service in 1985 and manufactured by Australian Defence Industries in Lithgow, the F88 Austeyr model is also in use by New Zealand), Bolivia, Ecuador (since 1988), Ireland, Luxembourg, Saudi Arabia, Tunisia (introduced in 1978), Pakistan, and (since 1988) U.S. Customs Service (now the U.S. Immigration and Customs Enforcement agency). The AUG, a bullpup 5.56mm assault rifle, is a selective fire weapon with a conventional gas piston operated action that fires from a closed bolt. Designed as a family of rifles that could be quickly adapted to a wide variety of roles with the change of the barrel to a desired length and profile, the AUG is a modular configuration rifle that employs a high level of polymer and advanced alloy components. The rifle features an Spz-kr type two-stage trigger (pulling the trigger halfway produces semi-automatic fire, pulling the trigger all the way to the rear produces fully automatic fire) and a safety mechanism (cross-bolt, button type), located immediately above the hand grip. In its "safe" position (white dot) the trigger is mechanically disabled; pressing the safety button to the left exposes a red dot and indicates the weapon is ready to fire. Some versions have an ALO or "automatic lockout", a small projection at the base of the trigger. This was first included on the Irish Defence Forces variant of the rifle, and soon after, the Australian Defence Forces variant. In the exposed position the ALO stops the trigger being squeezed past the semi-automatic position. If needed, the ALO can be pushed up to permit automatic fire. Three-pronged, open-type flash suppressors were used on the 350 mm (13.8 in), 407 mm (16.0 in) and 508 mm (20.0 in) length barrels, whereas the 621 mm (24.4 in) light machine gun barrel received a closed-type ported muzzle device (combination flash suppressor and compensator) and an integral, lightweight folding bipod. The flash suppressors are screwed to the muzzle and internally threaded to take a blank-firing attachment.